wikillm

Concept · 1 paper · updated 2026-11-22

Hilbert-Huang transform

Turns a window of a 1-D signal into a time-frequency image from its first intrinsic mode functions. One card on file: 32x32 images of shaft-mounted bearing vibration feed a CNN. The paper gives few HHT details, so the image cannot be rebuilt from the text.

signal-processingtime-frequencybearing-fault-diagnosis

Markdown2 min read

AI-compiled overview, updated 2026-11-22, not yet reviewed by a human. Every claim cites its source; check it when a detail matters.

Overview

The Hilbert-Huang transform (HHT) is used here as a way to turn a window of a 1-D sensor signal into a 2-D time-frequency picture. The paper applies it to linear acceleration, keeps only the first three intrinsic mode functions (IMFs), and renders the result as a 32x32 image 2112.08673 §2.1.1. The paper calls the result "time-frequency images" and feeds them to a CNN 2112.08673 §2.

The paper relies on the original HHT reference, which it cites as ref. 36 2112.08673 §2.1.1 §4. That reference is not on file, so this page does not restate its definitions. Only the choices the card's paper reports are described here.

The wiki holds one card for this concept. It is an application to bearing fault diagnosis, not a study of the transform, so no variant comparison is possible yet.

Variants

Windowed HHT images for a CNN (bearing vibration)

Each window is 3,897 samples long, and consecutive windows start 1,559 samples apart 2112.08673 §2.1. The HHT is applied to the linear-acceleration window, using the first three IMFs. The result is a 32x32 image with three channels 2112.08673 §2.1.1 §3.2. The image is one input of a hybrid model. The other input is two spectral band powers, N1 and N2, from the angular-acceleration signal, which is not an HHT feature 2112.08673 §2.1.2.

The authors report 98% test accuracy for the CNN branch on these images alone, and 99.6% for the hybrid. These are author-reported numbers on one rig at one shaft speed 2112.08673 tab. 3 §4. The paper also says the first three IMFs were the "most effective" of the choices it tried 2112.08673 §2.1.1. The card for this variant is Intelligent Bearing Fault Diagnosis Method Combining Mixed Input and Hybrid CNN-MLP model.

When to use which

There is one variant on file, so the table compares what the card supports against the constraints an implementer is likely to meet.

SituationUseWhy
Sensor on a rotating shaft; single known speed; a CNN is availableThe windowed HHT image in the variant above, with the same window and IMF count 2112.08673 §2.1 §2.1.1This is the only setup on file with reported accuracy. The paper reports no other speed §4.
Need a reproducible image from the text aloneNot yet: fix the EMD stop rule, envelope method, grid mapping and colour map yourself, and report themThe paper does not state these choices 2112.08673 §2.1.1. Each one changes the image.
Want a non-HHT time-frequency inputSee wavelet-transformNot compared in this paper.

Implementation sketch

Only steps the card's paper states are included. Items the paper leaves open are marked "not stated".

Pseudocode
# HHT image of one window  [§2.1] [§2.1.1]
# Input:  linear: 1-D window of 3,897 samples  [§2.1]
# Output: image, 32 x 32 with three channels  [§2.1.1] [§3.2]

def hht_image(window, num_imfs=3, size=32):
    # Decompose the window into intrinsic mode functions  [§2.1.1]
    # The decomposition method and its stop rule are not stated.
    imfs = decompose_into_imfs(window)
    # Keep the first three IMFs only  [§2.1.1]
    kept = imfs[:num_imfs]
    # Map the time-frequency content to a size x size grid  [§2.1.1]
    # Bin counts, envelope method and colour map are not stated.
    return render_time_frequency(kept, size)

Contradictions

None known. The wiki holds one card on this concept, so there is no second paper to disagree with.

Papers

Source and license

Compiled from the papers listed on this page, all published under CC BY, CC BY-SA or CC0, with citations. See each paper's page for its authors and license.